3. Check the remained money of the SIM card in time
4. Keep vehicles under the signal of GSM.
5. Secret the password of the main unit. Change the password once it is disclosed
6. Under the system is armed status, owner can not be opened the door and start
engine with key, if owner do these action, system will alarm; After arm system
by phone., system can only be disarm by phone
7. It is dangerous to stop the vehicle when it is running fast, system will ask user
to confirm. Suggest notifying the driver before using this function ,first the user
can warn the driver and give him some time to respond ,if no danger ,then stop
the car running
Index parameter
(1) Base unit
Working voltage: 12V
Static current: 40mA-60mA
Working frequency when arming and disarming: 400MHz-433MHz
Cover scope: same as the GSM
Time for alarming: It lasts till system disarmed or the alarming call answered by
someone
(2) Output voltage of control interface
Stop engine voltage: 0V
Control oil line voltage: 0V
Control loudspeaker voltage: 12V
(3) Input voltage
Checking door sensor voltage: 0V
Checking key sensor voltage: 12V
-12-
Detail functions introduction
1. Wireless keyboard operation
(1) Menu function of keyboard
Press the
“
*
”
and
“
#
”
on the keyboard (if there is password ,press the
“
*
”
+
password: ****** +
“
#
”
), then voice prompts
“
welcome you to GSM car alarm
system
”
, and enter into phone operation menu, in which except
“
For Monitoring
press 2 ,To talking press 3
”
cannot be implemented by keyboard, these two function
can only be implemented by remote telephone; any other options are the same with
“
Telephone operating function
”
.
(2)Talking
When someone call the car phone number (SIM card number in base unit), you
will hear the ringing, during this time, press the
“
Call
”
button to start talking
(3) Automatic Re-dial
Press the
“
call
“
button to redial the last telephone number you called.
2. Phone operation
Main menu
(1) When someone calls in, the base unit detect whether this calling is from the four
controlling phone numbers (Please refer to how to set up the controlling phone
numbers), if not, enter into talking menu directly. If yes, voice prompts
“
please
enter password ,and press # to finish
“
,with correct password ,you can then enters
into the voice menu
“
To check system status press 1,for monitoring press 2,to talk
press 3,for car control press 4,for change password press 5,for controlling phone
number set up press 6,for exit press 0
”
with wrong password ,voice prompts
“
Wrong password ,try again
”
,continuously wrong password for three times, voice
prompts
”
Wrong password bye
”
,and the call ends
(2)If no response
If you don
’
t respond to the system during the call 45 seconds later,
“
Du
”
sound once
per 5 seconds, when time ups to 1 minute, voice prompt
”
Time is out, bye
”
.
(3)In any case, talking or someone calling in, if alarm is triggered, alarming call will
be advanced and system will cut off the line for talking or calling.
-5-
