If you want to delete password, voice prompts
“
please enter password and press
“
#
”
to finish, only press
“
#
”
without any number, then system prompts
“
your enter
password is *****
”
,
“
To confirm press 1,for re-enter press 2,for exit press
0
”
,choose
“
To confirm press 1
”
,system prompt
“
set successfully
”
, then the
previous password deleted .
Notice: the password should be numbers 1 to 6 digits.
6
、
Controlling phone number set-up
Contact with the base unit by phone(attention: if you have set up the controlling
number, only these controlling numbers can enter into system ) to enter into
operating main menu and select
“
for controlling phone number set press 6
”
then
enter into next sub-menu:
(1) Set up the first controlling phone number
Enter into sub-menu and choose
“
For first controlling telephone number set
press 1.
”
then system prompt
“
Enter phone number, press # to finish
”
, after that,
voice reports
”
your entered phone number is ******,for confirm press 1,for re-enter
press 2,for exit press 0
”
then choose
“
confirm press 1
”
, finally
“
Set successfully
”
;
choose
“
For re-enter press 2
”
, please input telephone No. again; choose
“
For exit
press 0
”
and you will exit from
“
first controlling phone number Set up .
”
; if you
want delete phone number, after heard the voice of
“
enter phone number ,press # to
finish
”
, please just press
“
#
”
without any number, system prompts
“
your entered
phone number is ******, for Confirm press 1,for re-enter press 2,for exit press 0
”
.
Press 1, system will disregard the previous number
(2) Set up the secondary controlling phone number
Enter into sub-menu to choose
“
for secondary controlling phone number press
2
”
, the operating method is the same as the first controlling phone number set up.
(3) Set up two emergency phone numbers
Enter into sub-menu to choose
“
For first emergency phone number set press 3
”
,
the operating method is the same as the first controlling phone number
Enter into sub-menu to choose
“
For secondary emergency phone number set
press 4
”
; the operating method is the same as the first phone number set up.
Attention:
choose
“
0, exit
”
in the main operation menu, voice prompts
“
Thanks,
bye
”
, the call ends
-8-
3. Alarm
(1)Shaking alarm
Press the
“
Arm
”
button on the existing or factory-installed remote transmitters,
arm the system, after 25 seconds, and trigger the system by shaking the first
time ,direction lights flash for 5 seconds ,siren chirps discontinuously for 5 seconds.
Trigger the system by shaking again, direction lights flash for 25 seconds, siren
chirps discontinuously for 25 seconds, the base unit call the programmed controlling
phone number, after you answer the call ,voice prompts
“
Car shake
”
for 5
times ,then enter into the main operation menu
(2)Car door opened alarm
Under system armed status ,open the door ,the car door lock/unlock sensor
detect the intrusion, direction lights flash for 25 seconds ,siren chirps at the same
time ,the base unit call the programmed controlling phone number, after answering
the call ,voice prompts
“
car door open
”
5 times ,then enter into main operation menu
(3)Car started alarm
Under system armed status, some one start illegally, the system detect the
intrusion, direction lights flash for 25 seconds, siren chirps at the same time, the
base unit call the programmed the controlling phone number, after answering the
call, voice prompts:
”
engine started
”
(4) power-off alarm
Under the status of standby battery is on status, Cut off the base unit
’
s power
supply ,the base unit will call the programmed controlling phone numbers
automatically ,after answering the call ,voice prompts
”
system power off
”
for 5
times ,and then enter into main operation menu, during this time, direction light and
siren won
’
t work
(5) Emergency help
Under the system disarmed status ,press the emergency button over 2 seconds,
the base unit call the programmed emergency phone numbers, after some one
answers the call ,voice prompts
“
Emergency call", during this time, Alarm without
any sounds or lights.
(6) No answering for the alarm call
If no answer to the call to the first controlling phone number ,the system will dial
the second one automatically ,if still no answer ,system will return to the first
controlling phone number ,and system will I
-9-
