Amulex ESB030, User Manual

Page: 2 / 8

2
1.
Important Safety Instruction
•
Do not open the case, as there are no serviceable parts inside. Your warranty will be
void.
•
Do not try to repair the unit yourself, contact your local supplier or your warranty will
be void.
•
SAVE THESE INSTRUCTIONS--This manual contains important instruction that
should be followed while installation and operation.
•
Make sure that the AC Utility outlet is correctly grounded to avoid any possibility of
unpredictable voltage leakage.
•
Make sure the input voltage is within the windows stated in the specs sheet and the
load connected is within the rated capacity.
•
Should a strange noise, or smell occur, please turn off the unit and consult your local
distributor for repair immediately.
3
2. Installation and Operation
2.1. ESB Unpacking
2.1.1. Remove the PE foam of the ESB.
2.1.2. Check attached accessories.
¾ User’s Manual x 1 copy
¾ Screws x 1 set
¾ Fixing metal kit x 2 sets
2.2. Selecting Installation Position
It is necessary to select a proper environment to install the unit, in order to minimize
the possibility of damage to the ESB and extend its life. Please follow the instructions
below:
z
Please ensure the installation site environmental conditions are in accordance
with working specifications to avoid overheat and excessive moisture.
z
Do not place the ESB in a dusty or corrosive environment or near any flammable
objects.
z
This ESB is not designed for outdoor use.
2.3. Wire Assembly of the Input & Output
To UP S
OUT PU T
BR EA KE R
PU SH TO RE SE T
O UT PU T
BR EA KE R
PU SH TO RE SE T
Figure 1: ESB front Panel
○ 1 Input Power Cord(To UPS): to the Power Module or the output terminal of the
transformer Module GTM.
○ 2 & Output Circuit Breaker: for protection purpose
○
3
& Output Socket: to the Load