Revise Date: 1/12/2016
n:\amtryke\manuals and instructions\models\hp-1000\hp1000 w-tilt steering assembly.doc
8 of 25
Main Steering Installation
1)
The main steering tube is pre-attached to the frame and is on a hinged point. Raise the main steering tube so that
the angle adjuster can be folded down.
2)
Pre-installed in the frame is a long Allen head bolt. Remove the bolt but unscrewing the nut and align the angle
adjuster to the hole in the frame. Install the Allen bolt and nut and tighten.
3)
The angle of the steering/crank can be adjusted to fit the rider by loosening up the two Allen head bolts located
on the collar.
Angle adjuster
