AMTC RemoteLink IP Digital Media Player Installation and Operation Guide 5/24/2012 Page 7
wire over a screw, and then tighten the screws again. It is not important
which wire goes to which screw.
Terminal Strips (a.k.a. 66 blocks or punch-down strips)
These are not actually part of the KSU, but are rectangular plastic bars
approximately 2” x 10” with rows of metal prongs, by which the phone
lines and extensions connect to the phone system. Some phone systems
receive their MOH input by attaching (punching down) to two rows on
these terminal strips. Unless the original phone system installer was
thoughtful enough to clearly label the proper rows “MOH” or “MUSIC,”
you probably cannot tell where to connect. Even if clearly labeled, proper
attachment requires a special tool. A professional telephone system
technician will probably be required to connect your player.
Connector types:
RCA Male 3.5mm Mono Male
RCA Female
3.5mm Mono Female
4. If an external music source will be used, connect an audio cable from
the external music source to the player’s LINE INPUT using a 3.5mm
mono male connector.
5. Connect power adapter to wall outlet and 9VDC POWER INPUT.
Avoid using any circuit that is also powering any heavy equipment or
appliances, particularly air conditioners or refrigeration equipment. We
