3.3. Keypad
NAME
Key Features
ON/OFF
Power on / off, Just off the internal DC power supply
START / STOP
Start heated/ stop heated
TARE
Weighing peeled, Settings exit
MENU
Enter the setting menu
CONVERSION
Switching measurement results
ENTER
Confirm the current setting, go to next
RESET
Return to the weighing mode (short press), calibration
balance (long press)
DOWN
Reduce
UP
Add
3.4 First testing
1. First test, if not change the temperature and time settings, the moisture meter
defaults to factory defaults.
2. Put empty sample pan on the holder (see section 2.3).
3. Press the “TARE” to clean weight.
4.Put the sample on the pan (Sample weight should be heavy than 1g, the general 3-5g).
5. Close the heating cover, press the "Start / Stop" button to start the test. At this point,
4
