AMT TDD-3, User Manual

Page: 2 / 4

www.amtelectronics.com www.amtelectronics.com
2 2
AMT TDD-3 architecture:
9 Analog input and output circuits.
9 Fully digital circuit of original sound delay.
9 High-quality analog-to-digital and digital-to-analog converters.
9 Fully functional digital control (except for the signals mixing and their levels
control).
9 Analog circuits for the signals levels and phases changing.
9 Another circuits for signals mixing.
9 Application of high-quality film capacitors.
Use only MONO-JACKS for TDD-3 connections.
Important! Like other top-class devices AMT TDD-3 is
sensitive to power source quality. We insist that you use
either the power adapter conforming to the quality
requirements (recommended adapter: АМТ PSA0109 9V/800mA) or
9V 6F22 battery.
Before you start:
For safe transportation the device was carefully packaged by the manufacturer.
However, if the cardboard packaging is damaged you should immediately inspect
the device for the absence of external damages.
¾
In case of damages do NOT SEND the device to manufacturer,
but inform the seller or transport agency, since otherwise you
will lose the right to damage compensation.
¾
In order to avoid damages during storage and transportation
always use original packing.
¾
Do not allow children to play with the device and packaging
materials.
¾
Please, recycle all packing materials in the way harmless to
the environment.
¾
In order to avoid the device overheating provide a sufficient air
flow around it; do not cover it and do not place near other heat
emitting devices.
¾
Device operation near powerful radio transmitters and sources
of high-frequency signals can result in appreciable
deterioration of sound. In this case increase the distance
between the device and the transmitter and use screened
cables for all interconnections.
CAUTION!
Please be aware that high volume can harm your hearing and / or
damage the dynamic heads of your acoustic system. Before turning
the device on rotate Volume controls to extreme left position
(counter-clockwise). Always try to adhere to moderate volume level.
Specifications:
Use only external devices and accessories recommended by the
manufacturer.
Powering the device from battery and power adapter
AMT TDD-3 is powered both by battery (DC 9V 6F22) and DC 9V external power
adapter (the required specifications are shown in Specifications).
If the device is
battery powered, the device is switched on only after insertion of
MONO
JACK into INPUT
located on the river and all of the device. This is the
way of saving your battery resource.
When the device is powered by power adapter, the battery is turned off. In this case
the device switches to the power adapter use at once; the presence of
JACK in
INPUT is not necessary
.
Attention! In order to save the battery resource, it is recommended
to use external power adapter whenever possible.
Controls.
Top panel.
1. D.TIME
-adjusts sound delay time.
2. E.LEVEL
adjusts delayed signal level in the device's output signal.
3. OUT B / MONO
В delay output.
4. OUT A
– delay output.
5. INPUT
- delay line input.
6. F.BACK
sets the number of repetitions of the delayed signal.
7. TAP / SET-
delay line operation modes indicator.
8. TAP / SET
button changes delay modes.
9. BYPASS
switches between “EFFECT” and “BYPASS” modes.
10. BYPASS
indicator – when lit, delay line is in the “EFFECT” mode;
when off, the signals do not change (“BYPASS”)
IN
Impedance 1 MOhm
Nom. Sensitivity -10dB (250mV)
OUT A
Output impedance 10kOhm
Output signal level 0dB
OUT B
Output impedance 10kOhm
Output signal level 0dB
AD converter
Capacity 24-bit
Sampling frequency 54kHz
DA converter
Capacity 24 bit
Sampling frequency 54kHz
Signal delay turndown
13 ms-3.35 s.
Delayed signal
repetition quantity
variation range
1-
∞
Delayed signal phase
variation range
0/180 грд .
Power 6F22 battery
Voltage DC 9V
Nom. consumed current 97mA
Power adapter
(optional) Recommended: АМТ
PSA0109 9V/800mA
Voltage DC 9V
Current 0.8A
Dimensions/ weight
NET dimensions (W х H х D). 119 х 55 х 100 mm.
NET WEIGHT (without
battery)
0.35 kg.
Overall dimensions (W х H х D). Appr. 215 х 88 х 140mm.
Gross weight (without
battery)
Appr. 0.5 kg.