AMT ACCEL-7450, User Manual, Page: 35 / 62

ACCEL-7450 User's Manual
- 28 -
33 COVER DETECT 34 BAUD RATE 35 PARITY BIT 36 DATA LENGTH
37 STOP BIT 38 PROTOCOL
3) Press key to enter into submemu.
Such as, select BAUD RATE, press key to enter BAUD RATE and the particular items are
shown (as shown below):
The right side of the figure shows the items belong to BAUD RATE, item with “ ” ※ sign is the
current setting.
4) Press or key can select in the submenu.
Such as, If need to change the baud rate to “9600 BPS”, press or key to select the
item of “9600 BPS”, and then press ENTER key to save the setting. The newly select item will
mark with “
※ ” in the back.
5) Press key to exit the MENU SETUP MODE.
33. COVER DETECT ►
MENU SETUP
34. BAUD RATE ►
5. 9600 BPS ※
BAUD RATE
6. 4800 BPS
HIGH IMPACT
MENU