AMT ACCEL-7450, User Manual, Page: 15 / 62

ACCEL-7450 User's Manual
- 8 -
2.9.2 Connecting to the USB Interface
1. Plug the USB cable A end (flat shape) into the computer's USB interface. As shown in Figure 2-13.
2. Plug the USB cable B end (square shape) into the printer's USB interface.
Note: Don't impact the plug after connecting to the USB cable.
2.9.3 Connecting to the Ethernet Interface
Plug the RJ-45 crystal plug of the Ethernet cable into the printer, and plug the other plug into the LAN.
As shown in Figure 2-16.
Note: The details of Ethernet interface printer’s net setting please refer to the User’s Manual
.
2.9.4 Connecting to the Serial Interface
1. Turn off both the computer and the printer. Plug the serial cable connector securely into the
printer's serial interface. Then tighten the screws on both sides of the connector. As shown in
Figure 2-17 or Figure 2-18.
2. Plug the other end of the cable into the computer's serial interface; then tighten the screws on both
sides of the connector, and make sure it is tight to the interface.
Figure 2-15 Connect to the USB interface
Figure 2-16 Connect to Ethernet interface
Figure 2-17 Connect to the serial interface (9-pin)
USB cable
USB interface
Ethernet cable
Ethernet interface
Serial interface
Serial cable
Screw