AMT ACCEL-7450, User Manual

Page: 19 / 62

ACCEL-7450 User's Manual
- 12 -
2.12 Network Settings
Caution: The network printing function needs the operation system of Windows2000 or above.
2.12.1 Connecting Printer
Power on the printer, connect with the Ethernet cable which has been connected to LAN, and look into
the information of Ethernet LED indicator to ensure the printer has entered into the normal connection.
2.12.2 Setting IP Address
1. Run NetFinder Software
Double click NetFinder.exe in the PC which connects the printer in the same LAN. The figure of the
software is shown as follows:
2. Search printer
Click “Search” button in the main interface, the dialog box appearing will begin searching
automatically and show appearance, listing a printer in the main interface if found. The time is
counting down in the progress bar (10s in total) and the search will finish as soon as the time is over.
When going on searching, press “search” button again.
Yellow LED Green LED Description
ON BLINK Normal
OFF OFF Not connect to network
Button description:
Exit—Exit from the software
Search—Search printers in the same LAN
Assign IP—Modify the IP address and other settings for the specified printer.