AMT Datasouth Accel-7450 User Manual Download Page 41

Page: 41 / 45

ACCEL-7450

Error messages

Function errors

Function errors indicate a serious problem that cannot be recovered by
the user. The printer can report 12 types of functional errors.

When a function error occurs, turn the power off, remove paper from
inside the printer then turn the printer back on.

If the message remains after the above procedure, contact AMT
Datasouth for assistance.

Operational error message



ONLINE lamp blinks. The print head has

become too hot during high-density printing.
When this message is displayed, printing speed
is reduced or printing stops. When the print head
temperature drops, the printer resumes normal
printing.



Indicates fanfold paper is not fed back to the

parking position properly. Remove and reload
paper.



Fanfold paper is not loaded in the rear tractor.

Install fanfold paper in the rear tractor and
press the ONLINE key.



A cut sheet is not loaded into the printer. Put a

cut sheet on the front rack and load it into the
printer.

HEAD PROTECTION

PAPER OUT

PARK ERROR

FUNCTION

ERROR 1~12

Summary of Contents for Accel-7450














































Search results

Summary of Contents for Accel-7450

Reviews:

Related manuals for Accel-7450

Brands by name

Popular brands

AMT Datasouth Accel-7450, User Manual

Search results

Summary of Contents for Accel-7450

Reviews:

Related manuals for Accel-7450

Brands by name

Popular brands