SPECIFICATIONS
Weight ..............................25 lbs. (1400)
31 lbs. (1550, 1700 and 1900)
40 lbs. (2100)
Capacity ...........................Up to .25 gallon (1 liter) per minute.
(DSP 1550 Series)
Up to .33 gallon (1.25 liters) per
minute. (cart model DSP 1700 Series)
Up to .42 gallon (1.6 liters) per
minute (cart model DSP 1900 Series)
Up to .45 gallon (1.71 liters) per
minute. (cart model DSP 2100 Series)
Power source ...................1/2 Hp universal motor (1550 Series)
5/8 Hp permanent magnet DC motor
(1700 series)
3/4 Hp permanent magnet DC motor
(1900 Series)
7/8 Hp permanent magnet DC motor
(2100 series)
Power requirement ...........15 amp minimum circuit on 115
VAC, 60 Hz current.
Generator .........................15 amp A/C.
Spraying pressure ............Up to 2800 psi.
Safety features .................Spray gun trigger lock and pressure
diffuser; built-in tip safety guard;
priming knob for safe pressure
release.
Capability..........................Sprays a variety of paints, oil base
latex, primers, stains, preservatives
and other nonabrasive materials,
including pesticides and liquid
fertilizers.
Unit Tip Size
:
Supplied
Max. Size Supports
1400
.013
.015
1550
.013
.015
1700
.015
.017
1900
.017
.019
2100
.017
.021
COMPONENTS
The shipping carton for your painting system contains the following:
• Suction set and return tube
• Spray gun with filter
• Spray tip assembly
• 25 foot long, 1/4 inch diameter pressure hose (1550)
• 50 foot long, 1/4 inch diameter pressure hose (1700/1900/2100)
• Packing lubricant
GENERAL DESCRIPTION
This high performance piston pump is a precision power tool
used for spraying many types of materials. Read and follow
this instruction manual carefully for proper operating
instructions, maintenance and safety information.
Controls and Functions
ON/OFF Switch ................The ON/OFF switch turns the unit on
and off.
Suction Set .......................Fluid is drawn through the suction
set into the pump.
Fluid Section ....................A piston in the fluid section moves up
NOTE: This pump is available in two models: a stand
model and a cart model. The stand model is
shown in this manual. All information given for
the stand model applies to the cart model
except where indicated.
4
© 2001 Wagner Spray Tech - All rights reserved.
and down to create the suction that
draws fluid through the suction set.
Spray Gun ........................The spray gun controls the delivery
of the fluid being pumped.
Spray Hose ......................The spray hose connects the gun to
the pump.
Return Tube......................Fluid is sent back out through the
return tube to the original container.
PRIME/SPRAY Knob........The PRIME/SPRAY knob directs fluid
to the spray hose when set to SPRAY
or the return tube when set to PRIME.
The arrows on the PRIME/SPRAY
knob shows the rotation directions for
PRIME and SPRAY.
Pressure Control Dial .......The pressure control dial controls
the amount of force the pump uses
to push the fluid.
PRIME/SPRAY
Knob
PRIME/SPRAY
Knob
Fluid Section
Suction Set
Return Tube
ON/OFF Switch
(Rear View,
1400, 1550, 1700,1900)
(Front View, 2100)
Spray Hose
Spray Gun
Pressure Control Dial
English
