4-4
129359-452, Volume 1
Service and Maintenance Procedures
Routine Maintenance
Figure 4-2. Change Paper Roll
9.
Slide tab of paper roll into printer from the back (with platen still in down
position) until it exits from front of printer.
10. Grasp tab of paper, pull out 10 to 12 inches of paper, and feed this paper
through opening in platen.
11. Raise platen back up into position and lift out take-up spindle.
12. Insert tab of new paper roll into slot of take-up spindle and rotate spindle
to secure paper in slot.
13. Press take-up spindle back onto the drive mechanism and rotate to verify
paper is secured to take-up roll.
14. Close printer door.
Summary of Contents for EAGLE SERIES 3011
Page 3: ...Intentionally Blank Page ...
