Two Post Car Lift AM-TPL11CF
11
FOUNDATION REQUIREMENTS
•
Visually inspect the site where the lift is to be installed and check for cracked
or defective concrete
•
DO
NOT
install or use this lift on expansion seams or on cracked or defective
concrete.
•
DO NOT install or use this lift on any asphalt surface or any surface other than
concrete.
•
Lift is designed for INDOOR INSTALLATION ONLY.
•
This lift must be installed on a solid level concrete floor with no more than 3-
degrees of slope.
•
Lift buyers are responsible for any special regional structural and/or seismic
anchoring requirements specified by any other agencies and/or codes such as
the Uniform Building Code (UBC) and/or International Building Code (IBC).
•
All models MUST be installed on 3000 PSI concrete
and have a minimum of 12”
thickness with steel or fiber mesh. New concrete must be adequately cured by
at least 30 days minimum.
Installation area picture (See figure below.)
Summary of Contents for AM-TPL11CF
