19
With the T1 ( ‡ ) key the value can be increased starting at …0ˆ through to …9ˆ. To access a lower
value press the T1 ( ‡ ) key past …9ˆ to start again with …0ˆ.
Press the T2 ( ‚ ) key to access the next digit. The digit starts flashing. To change the value press
T1 ( ‡ ) key.
After setting the last digit the decimal point starts flashing and can now be moved by pressing the
T1 ( ‡ ) key. Also the measuring range …kˆ can be selected where required.
By pressing the T2 ( ‚ ) key the complete process of setting the final value can be repeated.
7. Press T3 (OPT) to exit the setup menu.
Deactivation of the analogue output
The analogue output can also be deactivated.
1. Select deactivation (see 3. above) and activation of the analogue output by pressing T3 (OPT).
2. OP2
AUS
ADJUST
is displayed with „AUS… and „OP2… flashing alternately.
3. By pressing T3 (OPT) key the analogue output is deactivated and the setup menu is displayed.
Store the set parameters in the flash memory by pressing T4 and exit setup mode.