manualshive.com logo in svg

AMS FS1790, Installation Operating & Maintenance Manual, Page: 2 / 10

Share
Download
AMS FS1790 Installation Operating & Maintenance Manual Download Page 2

1

AMS-S-082/DS/09.2016 (ISSUE 2)

©AM SENSORS LTD

Contents

1.   Safety Instructions  .................................................. 1

2.   Functional Description  ..........................................  2

3.   Area of Application  ..............................................  3

4.   Installation  ............................................................  4

5.   Electrical Connections  .........................................  7

6.   Commissioning / Functional Testing  .................... 11

7.   Maintenance  ...................................................... 12

8.   Technical Data  .....................................................13

9.   EC Declaration  .................................................... 14

1. Safety Instructions

Read these instructions before installing the ATEX Group I Horizontal float switch 
and placing it into operational service.

These instructions are intended for the personnel responsible for the installation 
and commissioning of the float switch.

Comply with the relevant safety regulations when using the equipment.

Do not install the float switch in the immediate vicinity of any strong 
electromagnetic fields (recommended min distance >1 meter).

Do not subject the float switch to heavy mechanical loads.

AMS-S-082/DS/09.2016 (ISSUE 2)

©AM SENSORS LTD.

WARNING:

Failure to comply with the instructions described within this manual 
can lead to malfunction or damage to the switch and if the switch is 
incorrectly installed the ATEX certification may be void.

Summary of Contents for FS1790











Reviews:

No comments