AFDAU-T1 Aerial Firefighting
Data Acquisition Unit
Installation Manual
AMS-IM-1-01 Rev. 7
22 September 2021
33
Configuring the AFDAU-T1
1. Configuration of the AFDAU-T1 is done using AFDAU Config Tool. Run the
AFDAU Config Tool.
2. Click the arrow next to the AMS logo to drop down the menu and select
“Configure”.
3. Plug the Mini USB end of the supplied USB lead into the powered AFDAU-T1
and the standard USB end into a port on your laptop.
4. When detected, the AFDAU-T1 port will be available in the dropdown box at
the bottom of the page as shown above.
5. Select the AFDAU port from the list (COM port number may vary to that
shown).
