8
AMROTEC®
Selecting Currency & Count Mode
To Select one of the installed currencies (if equipped) or turning off all Discriminating Modes:
Press the CUR key repeatedly or hold for few seconds to see all installed currencies (if
multi-currencies software is installed). The installed currencies will show sequentially at the
left corner of the LCD display.
Press CUR key repeatedly
USD / other currencies
COUNT mode
Press and Hold CUR key
list of USD / other currencies. Press
/ F1 or
/ F2 to
scroll up and down and press START to select your desire selection.
Currency and Value icons will show when any Discriminating mode is ON, and these icons
will disappear when discriminating feature is OFF (Back to COUNT Mode).
When Discriminating mode is OFF (COUNT Mode), only Qty (Pieces) are displayed.
Currency Discriminating Mode Screen
Piece Count mode Screen
Counterfeit Detection in COUNT mode
When all discriminating functions are OFF and device switches to (CNT) COUNT mode,
counterfeit detection can be activated to detect suspect banknotes. The device is equipped with
Dual UV type and MG counterfeit detector and can be turned on or off, if needed.
To turn on the UV & MG detection:
Press the F1 key to switch between UV / UV(A) / OFF Mode.
The LCD will show the actual status of this UV setting.
(UV ON): The device counts banknotes with UV detection on.
(UV(A): The device counts banknotes with
UV detection on and the UV strength
(A) is defined by the first note of a processed batch.
(UV Off): The device counts banknotes without UV detection on.
Press the F3 key to activate or deactivate MG counterfeit detection.
UV Mode
UV(A) Mode
