How to Operate
X
X
X
X
COUNT+
COUNT+
COUNT+
COUNT+
7
Power On / Off
To power on
X
X
X
X
COUNT+
COUNT+
COUNT+
COUNT+
:
Plug in the supplied Power cord to the appliance socket
of the device at the rear side.
Press the Power Switch button at the rear side of the
device.
After System initialization stage is completed,
X
X
X
X
COUNT+
COUNT+
COUNT+
COUNT+
enters into main display screen and ready.
To power off
X
X
X
X
COUNT+
COUNT+
COUNT+
COUNT+
:
Prior powering off, make sure that all counting results
are saved to memory, if not needed.
Press the power switch button to turn off the device.
Placing Banknotes
To operate the currency Discriminator device efficiently, please follow the below instructions:
Avoid counting wet, excessively dirty or spoiled banknotes.
Check for foreign object mixed within banknotes, i.e.: paper chips, rubber bands, clips etc.
which will jam the bill path or even may damage the sensors.
Prior counting, remove severely folded or curled banknotes from the stack of banknotes to be
counted.
Align all corners and edges of banknotes to avoid excessive rejection of banknotes to reject
stacker for recognition errors.
Put all banknotes in the middle of the note hopper and adjust the hopper guide for better
alignment and feeding of banknotes.
ON/OFF
