STEP 32
Always dry fit parts first.
Align parts carefully. Maintain the assembly flat on table while proceeding to
assembly.
1- Locate parts on a waxed paper to build the stab.
2- Glue E1 to a piece of 3/8 X 1’’ balsa stick as shown.
3- Glue a piece of 3/8sq balsa stick for elevator tip as shown
4- Glue a piece of 1/2 dia hardwood dowel to assy as shown
4- sand elevator leading edge to obtain a V shape 45 degrees up and down.
E1
3/4 X 3/8 balsa sticks pieces
1/2’’ dia hardwood
3/8’’ long
3/8 sq balsa
