The thirteenth screen: Relay1 mode setting
page
There are two relay output in
Ai
205. There
are two relay output modes for selection, one is
latching, the other is momentary. For the latching
mode, the relay can be used to output two statues
on or off. For the momentary mode, the output of
49
Fig 3.46 Relay1 mode
Fig 3.47 Relay1 closing time
Fig 3.48 Relay2 mode
the relay changes from off to on for a period of time Ton and than goes off. Ton
can be setting from 50-300ms. 0: latching 1: momentary
As in fig 3.46, Relay1 is set momentary
mode.
The fourteenth screen: Relay1 closing
time setting
When the relay mode is set momentary,
the closing time Ton is integer from 50 to
3000ms.
As in fig 3.47, the closing time Ton of
relay1 is 50ms.
The fifteenth screen: Relay2 mode
setting page
The setting method is the same as that
of relay1.
As in fig 3.48, Relay2 is set momentary
mode.
PDF created with FinePrint pdfFactory trial version
http://www.pdffactory.com
Summary of Contents for Ai205
