background image

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for one year from 
the date of purchase unless local laws require otherwise. This warranty does not cover fuses, 
disposable batteries or damage from accident, neglect, misuse, alteration, contamination, or 
abnormal conditions of operation or handling. Resellers are not authorized to extend any other 
warranty on the behalf of Amprobe. To obtain service during the warranty period, return the 
product with proof of purchase to an authorized Amprobe Service Center or to an Amprobe 
dealer or distributor. See Repair Section for details. THIS WARRANTY IS YOUR ONLY REMEDY. 
ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED OR STATUTORY - INCLUDING IMPLIED 
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, ARE HEREBY 
DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY SPECIAL, INDIRECT, INCIDENTAL 
OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY CAUSE OR THEORY. Since 
some states or countries do not allow the exclusion or limitation of an implied warranty or of 
incidental or consequential damages, this limitation of liability may not apply to you.

Repair

All Amprobe returned for warranty or non-warranty repair or for calibration should be 
accompanied by the following: your name, company’s name, address, telephone number, and 
proof of purchase. Additionally, please include a brief description of the problem or the service 
requested and include the test leads with the meter. Non-warranty repair or replacement 
charges should be remitted in the form of a check, a money order, credit card with expiration 
date, or a purchase order made payable to Amprobe.

In-warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During 
the warranty period, any defective test tool can be returned to your Amprobe distributor for 
an exchange for the same or like product. Please check the “Where to Buy” section on www.
Amprobe.com for a list of distributors near you. Additionally, in the United States and Canada, 
in-warranty repair and replacement units can also be sent to an Amprobe Service Center (see 
address below).

Non-warranty Repairs and Replacement – United States and Canada

Non-warranty repairs in the United States and Canada should be sent to an Amprobe Service 
Center. Call Amprobe or inquire at your point of purchase for current repair and replacement rates.

USA:  

Canada:

Amprobe Amprobe
Everett, WA 98203  

Mississauga, ON L4Z 1X9

Tel: 877-AMPROBE (267-7623)  

Tel: 905-890-7600

Non-warranty Repairs and Replacement – Europe
European non-warranty units can be replaced by your Amprobe distributor for a nominal 
charge. Please check the “Where to Buy” section on www.Amprobe.eu for a list of 
distributors near you.

Amprobe Europe*
Beha-Amprobe
In den Engematten 14
79286 Glottertal, Germany
Tel.: +49 (0) 7684 8009 - 0
www.Amprobe.eu
*

(Correspondence only – no repair or replacement available from this address. European customers please 

contact your distributor.)

Summary of Contents for AMP-210



























Reviews: