USING THE OTOWAVE 302+
22
OTOWAVE 302+ INSTRUCTION FOR USE
4.2.
SWITCHING THE INSTRUMENT ON AND OFF
Select the on/off button for 1 second to switch the instrument on. You will see a small hourglass in the
middle of the display indicating that the instrument is powering on. No warm-up time is required,
although a short diagnostic routine will run for a few seconds. During this time the internal pump will
operate.
To switch the instrument off again, hold the button for approx. 2 seconds and the instrument and LED
b will turn off.
Please note:
The power indicator (LED a) will be illuminated as long as the instrument is connected
to the mains.
4.3.
MENU DISPLAYS
From the
MAIN MENU
, you can reach different submenus. Use the
navigation keys (up
▲
and down
▼
) or the Softkeys
(
S1
to
S6
)
to
navigate the options and select submenus.
To be brought one menu back, push the left navigation key
◄
.
The following submenus can be reached from the
MAIN MENU
:
•
New Test
•
Settings
•
View last (test)
•
Check (Daily Check)
•
Database
•
Profiles
•
System
•
Sys. Info (System Information)
4.4.
PROFILE STRUCTURE
4.4.1.
GENERAL
The Otowave 302+ offers the possibility of creating and customising profiles. In total, 6 profiles are available.
By default, the Otowave 302+ comes with 3 pre-defined profiles offering the ideal test settings for either adults, children
or nenoates. It is possible to change these 3 factory profiles and in addition 3 further profiles can be defined by the user.
