A M P L I F I C A Z I O N I
Technical Description
pagina 4 di 10
www
.amplificazionilombardi.it
550 W
850 W
1250 W
1250 W
1400 W
10Hz - 50 KHz
10Hz - 50 KHz
Thermal separated each channel
< 0,01% from 20 Hz to 20 KHz
Over 500 from 20 Hz with 8 Ohm load
.75 Volt on output at 50 KOhm
>20 KOhm / >10 KOhm
-100 dB
< Noise from 20 Hz to 10 KHz
AB
01 XLR male - 01 XLR female (balanced)
01 Speakon
20000uF
220 - 240 Volt
12A maximum power (with all 4 channel operation)
2 two-speed fans (thermal) forced - 60mm fans
toroidal
2 RACK units
25 Kg
The Lombardi LAQUAD1200 is a 4 channels fully analog audio amplifier, class AB.
We designed this amplifier to be highly efficient and to maintain accurate audio
performances in the whole bandwidth even under stress condition.
In the Lombardi LAQUAD1200 there are 4 audio Amplifiers, 4 Crossover and 4
safeguard independent Optical Limiters for each channel. The high quality of its
components, the toroidal power supply and the handmade production guarantee the
highest standards of Lombardi’s made in Italy products. The audio amplifier
LAQUAD1200 was tested to the limit (impedance less than 2
•'
)before it was placed
on the market.
LAQUAD1200
1KHz, 0.001% THD+N
8 Ohm Stereo
4 Ohm Stereo
2 Ohm Stereo
max RMS output (Volt) per channel
max peak output (Volt) per channel
frequency response
band width
protection
THD+N
dumping factor
input sensitivity and impedance
input impedance(Bal./Unb.)
noise
crosstalk
class
In-connector each channel
out-connector each channel
filter
power
supply
ventilation
transformer
dimension
weight
description
