Amplicon Impact-E Series, User Manual

Page: 6 / 50

CPU:
Chipset:
Intel® 852GM + ICH4 chipset
System
Supports one unbuffered nonECC DDR SO-DIMM
Memory
: 200/266 memory up to 1GB
Graphics: Intel® 852GM integrated Graphic, supports both
standard VGA and TFT.
CRT: Supports up to 1600 x 1200 at 85 Hz; 2048x1536 at
75 Hz
DB15 CRT VGA connector x 1
LVDS: Supports up to 48-bit, 1600 x 1200 at 60 Hz
Support single/dual pixel LVDS panel
Onboard LVDS transmitter for LVDS Interface down
to I/O Board.
Ethernet:
Intel 82562ET 10/100 Fast Ethernet
Supports PXE LAN boot function
Audio:
ALC655 CODEC - AC97 Audio Interface
Super I/O: IT8712F
ETX Connectors
X1
32-bit/33Mhz PCI x 4
Audio CODEC - AC97 Audio Interface
USB 2.0 x 4
X2 ISA Interface
X3 VGA x 1
LVDS x 1 (Dual Pixels)
LPT x 1
KB/Mouse
COM1 and COM2
IrDA 1.0 SIR
X4
Ethernet (10/100)
SMBus
IDE x 2
RTC:
On-chip RTC with battery back up / External Li-ion
Battery x 1 Located on Carrier Board
RTC Tolerance less than 2 secs ( 24 hours ) under
25˚C environment
WatchDog: Watchdog timeout programmable by Software from
1 second to 256 seconds. (Tolerance 5% under room
temperature 25°C)
BIOS:
Award System BIOS
Advanced Power Management support
4Mbit flash ROM
Power Supply: Supports both AT and ATX Power Supply.
+5V Power Only, follows ETX power and ground pin
definitions.
Drivers:
Windows 2000/2003, XP, Linux
Certifications:
CE approval
FCC Class A
Environment:
Operating temperature: 0°C to 60°C (32°F to 140°F)
Storage temperature: -20°C to 85°C (-4°F to 185°F )
Relative humidity: Non-operating 5%~95%, non-con
densing
Dimensions:
95mm (W) x 114mm (L) (3.74” x 4.5”)
Chapter 1 ETX Module Reference
Intel® ULV Celeron® M 600 MHz
1.2 Electrical Specifications