Chapter 3 Reference and Installation
At this point, now would be the time to change the memory if you
wanted. Please remember that your comes with memory preinstalled
Install the memory just as you would regularly SODIMM. Line up the
memory pins correctly coming in at an angle, start the pins and push
in and down until the sides of the memory snaps into the clip.
The chassis base shown below. Notice the 8 supports
to mount the carrier board.
WARNING
:
When you install memory into the socket, make sure
to tilt it 45 degrees and then slide it in. Be sure to read the memory
installation instructions to prevent damaging the memory during
installation.
3.11 Installing SODIMM Memory
Summary of Contents for Impact-E Series
Page 1: ...Impact E20 User Manual...
Page 4: ...Chapter 1ETX Module Reference...
Page 16: ...Chapter 2 Carrier Board Reference...