Chapter 3 Reference and Installation
Heatsink
1. To remove the heatsink and ETX module, remove the 4 screws at
the corner of the ETX module. Please note these same 4 screws also
secure the heatsink.
2. With the ETX module mounting screws removed, simply pull up
on the module on four corners to pop the module out of the four ETX
sockets that connect to the carrier board.
3.12 Removing the ETX Module and
Summary of Contents for Impact-E Series
Page 1: ...Impact E20 User Manual...
Page 4: ...Chapter 1ETX Module Reference...
Page 16: ...Chapter 2 Carrier Board Reference...
