Amphenol RJS-5ES Series, User Manual, Page: 11 / 13

Unmanaged Switch User Manual Page 11 of 13 Last Revised: 11-Jul-06
Amphenol – 948, Promenade de l‘Arve – B.P. 29 – 74311 THYEZ Cedex – France - +33(0)4.50.89.28.00 – www.rjswitch.com
Section 7 Technical Specifications
Technical
Specifications
Here are the technical specifications for these switches covered by this manual.
Copper Ports: (10/100BaseTx)
10/100BaseT(x) ports Shielded RJ45
Protocols supported All standard IEEE 802.3
Ethernet compliancy IEEE 802.3, 802.3u, 802.3x
Auto-crossover Yes , Auto-mdi/mdix-crossover
Auto-negotiating 10BaseT or 100BaseTX
Auto-polarity Yes (except port 9)
Flow control Half or full duplex (port 9 is full duplex only)
Ethernet isolation 1500 VRMS 1 minute
Plug and play Yes
Cable requirements Twisted pair (Cat. 5 or better) (shielded recommended)
Max. cable distance 100 meters
Multimode Fiber Port: (100BaseFX)
Fiber port mode Multimode
Fiber port connector Duplex SC or ST
Optimal fiber cable 50/125, 62.5/125 µm
Center wavelength 1300 nm
TX output power
RX input sensitivity
Contact Amphenol for optical details.
Maximum distance 4 km (see web or details)
Half and full duplex Switch or jumper selectable
Ethernet compliance 100BaseFX
Eye safety IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Singlemode Fiber Port: (100BaseFX)
Fiber port mode Singlemode
Fiber port connector Duplex SC or ST
Optimal fiber cable 9/125, 10/125 µm
Center wavelength 1300 nm
TX output power
RX input sensitivity
Contact Amphenol for optical details.
Maximum distance 20 km, 40 km (long haul models) or more (contact Amphenol)
Half and full duplex Switch or jumper selectable
Ethernet compliance 100BaseFX
Eye safety IEC 60825-1, Class 1; FDA 21 CFR 1040.10 and 1040.11
Downloaded from Elcodis.com electronic components distributor