Amphenol
PCD
Shenzhen
Application Specification for
HVSL60061/HVSL630062/
HVSL280063
Doc. No.:
APCD-TD-282
Rev.: H
Page 9 of 29
Subject:
Application specification for
HVSL600061/HVSL630062/HVSL280063
ECN NO.:
C5467N
Eff. Date:: 2021-5-20
F-0866-B
3. Assembly instructions for HVSL600061
3.1 Select the wire spec according to the connector model.
3.2 Cut and strip the wire insulation, the size is referred as below.
3.3 Crimp the signal terminals as shown in the figure below.
3.4 Select the cable according to the connectors P/N.
Wire spec
OD(mm)
0.5mm²
1.6±0.1
Retention force
: The
tensile force meets the
requirements of VW80302
（
9.1.4 table 12
）
P/N
OD (mm)
HVSL600061XXXX10
10.0 ±0.5mm
HVSL600061XXXX11
11.0 ±0.5mm
HVSL600061XXXX12
12.0 ±0.5mm
HVSL600061XXXX13
13.0 +0/ -0.5mm
4.0±0.5mm
4.0±0.5mm
Crimping orientation
should be the same
65.0mm ref
H
