Amphenol
PCD
Shenzhen
Application Specification for
HVSL60061/HVSL630062/
HVSL280063
Doc. No.:
APCD-TD-282
Rev.: H
Page 16 of 29
Subject:
Application specification for
HVSL600061/HVSL630062/HVSL280063
ECN NO.:
C5467N
Eff. Date:: 2021-5-20
F-0866-B
4.5 Slide the end cap, cable seal, spacer, inner shielding ferrule and outer
shielding ferrule on the cable in sequence shown as below.
4.6 Strip the jacket shown as below
4.7 Slide the inner ferrule until it is aligned with the cutting surface of the
jacket, then flip the shielding braid over to cover the ferrule, finally wrap 2-3
layers copper foil and cut all the filler shown as below.
End cap
Spacer
Inner
shielding
ferrule
Outer shielding ferrule
Cable seal
Direction
34.0±0.5mm
10.0±0.5 mm ref
Cut the filler.
Move the inner ferrule to align it
with the cutting surface.
Flip over the shielding and
cover on the ferrule.
Wrap copper foil.
Φ15.6±0.1 mm ref
When the cable OD is
small, add padding to
the cable jacket.
