Amphenol Industrial Operations
Amphenol Industrial Operations Europe
Amphenol Middle East Enterprises FZE
Amphenol Technology Shenzhen Ltd
40-60 Delaware Avenue
Via Barbaiana 5
Office C-37 PO Box 21107
Block 5 Fuan 2nd Industrial Park, Dayang Rd
Sidney, NY 13838-1395
I-20020 Lainate (MI)
Ajman Free Zone
Fuyong Town, Baoan, 518103 Shenzhen
USA
ITALY
UAE
CHINA
Tel: 1-520-285-5114 1-888-364-9011
Tel: +39 02 93254.204
Tel: +9716-7422494
Tel: +86 755 2881 8389
Fax: 1-520-397-7169
Fax:+39 02 93254.444
Fax:+9716-7422941
Fax:+86 755 2991 8310
6
H4 ASSEMBLY INSTRUCTIONS ENGLISH REV3 –OCTOBER 2014
Assembly process connector:
Insert contact cable assembly into back of male and female connector. A “click” should be heard or felt when the contact cable
assembly is seated in correct position. Contacts cannot be removed once seated.
See below pictures.
Connector cable female
Connector cable male
Back cap must be closed using a torque between 2.6 and 2,9NM.
Amphenol specified hand wrench tool (H4TW0001) can be used in this step or electric torque controlled wrench tool with as
well the Amphenol open-end back cap spanner (H4TE0000) or socket wrench (H4TF000). See below picture for hand wrench.
Note: Pneumatic wrench tools are NOT recommended since torque control is very difficult.
Double spanner cap closing operation
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
Downloaded from
