Parts Identification
ZS5601/ ZS5121 | ZONE SELECTOR
PAGE 3
7. REMOTE SELECT PORT - Z1 TO 6
This is to connect to remote paging mic (PM series) or Data Decoder (TD Series) for remote zone triggering. Upon trigger-
ing the zone via this port, it shall override the locally selected zones. External triggering switches or other mades of
paging microphone can utilise this facility provided -ve triggering method is used.
8. AMPLIFIER - ZONE OUTPUT CONNECTORS (ZONE 1 TO 6)
Output from amplifiers are connected to these terminals and speaker zoning is configured to the respective unit of ampli-
fier. The user has the flexibility to configure the zoning system as each zone comes with single amplifier output connec-
tion.
Please observe palarity when terminating the amplifier / speaker zones and ensure that each zone is over overloaded
(less than 500W rms)
9. REMOTE SELECT PORT - Z7 TO 12
Similar function as Part 7 but only available for ZS5121.
10. AMPLIFIER - ZONE OUTPUT CONNECTOR (ZONE 7 TO 12)
Similar to Part 8 but only available for model ZS5121.
