PAGE 2
TD6240 | PAGING MICROPHONE DATA DECODER
Parts Identification
1
amperes
3
2
4
5
6
7
8
1. LED INDICATORS
POWER LED for DC input, PRIORITY indicates either PR2 or PR1 is active and ACTIVE is for activation or normal
channel
2. POWER SUPPLY INPUTS
The decoder is operated by using 24V DC, we recommend Amperes PS9400 power supply to be used or other regu-
lated 24V DC power pack.
3. PAGING MIC CONNECTIONS
The connectors are to link to paging mics via EX2800 using 2 pair screen cable. There are 3 ports, which means
three circuits would be able to be connected.
Note :
Unlike previously, this version allows any priority setting of the mic to be terminated at either one of the ports. A mix
priority setting in a circuit can also be connected to a single port.
4. OUTPUT LEVEL SELECTOR
Output level from the decoder can be set to Mic or Line level.
5. AUDIO OUTPUT
Audio output from the decoder is balanced with output level determined by the level setting as per item 6.
FROM PAGING MIC
DIP SWITCH 7
(TIMER SETTING)
ON = TIMER INFINITY
OFF = TIMER 5 MIN
M/S
LOCAL MODE
ON - MASTER
OFF - SLAVE
6. DATA LINK FOR CASCADE
Front View
Rear View
This port shall be used if slave units are installed in the system. Link the data signal A/B to the data input of
the next unit (Part 7). Ensure correct polarity and the unit setting. See also item 9.
More than one TD6240 shall be used for larger system, such as 25 channel and above. There is no limitation
on the number of units that can be cascaded.
