Page 5
SQ9715 SEQUENTIAL POWER SWITCHER
Cascading SQ9715
2 units of SQ9715 can be linked to form a 14
channel power distribution setup. Setting has to
be made to make one of them as Master ( Ch 1
to 7 ) and the other ( Ch 8 to 14 ) as slave. In
cascading mode, the ON or OFF function is done
through the Master unit.
Note : Both units must have common body
grounding
REM
TRIG
8
: CH 7 DELAY
9
: OFF (MAS) / ON (SLAVE)
10 : ON / OFF BYPASS
1~7 : CH 1 ~ CH 7
ON
Another Quality Product From
C
CASC
LINK
1 2 3 4 5 6 7 8 9 10
REM
TRIG
8
: CH 7 DELAY
9
: OFF (MAS) / ON (SLAVE)
10 : ON / OFF BYPASS
1~7 : CH 1 ~ CH 7
ON
Another Quality Product From
CASC
LINK
1 2 3 4 5 6 7 8 9 10
link cable
ON
ON
1 2 3 4 5 6 7 8 9 10
1 2 3 4 5 6 7 8 9 10
MASTER UNIT
SLAVE UNIT
Setting for DIP 8 optional
When it is necessary to power up the
equipments from a remote location ( ie control
room located a distance away from main
equipment ), a simple connection with a
noiseless switch is all it requires. The maximum
distance shall not exceed 300m . For far
distance, please connect a capacitor of 0.1 uF
accross the contact point of the switch as shown.
REM
TRIG
8
: CH 7 DELAY
9
: OFF (MAS) / ON (SLAVE)
10 : ON / OFF BYPASS
1~7 : CH 1 ~ CH 7
ON
Another Quality Product From
C
CASC
LINK
1 2 3 4 5 6 7 8 9 10
ON
1 2 3 4 5 6 7 8 9 10
DIP SETTING
REMOTE SWITCH
0.1uF CAP
300M
DIP Switching
8 : CH 7 DELAY
9 : OFF (MAS) / ON (SLAVE)
10 : ON / OFF BYPASS
1~7 : CH 1 ~ CH 7
ON
Another Quality Product From
1 2 3 4 5 6 7 8 9 10
DIP Switch 1 ~ 7
Select OFF to bypass channel (isolate power)
DIP Switch 8
Select ON to enable channel 7 into delay OFF mode for 2 minutes
DIP Switch 9
For use in Cascading mode. For master unit (Ch 1 to 7), select OFF position and for
slave unit (Ch 8 to 14) switch to ON. The ON/OFF and lock switch would be disable in
the Slave unit.
DIP Switch 10.
Select ON to allow the ON/OFF switch active whereas OFF disable it. This is
applicable in remote switching mode.
To Trigger SQ9715 Remotely
