iPX5300 ETHERNET MUSIC CLIENT
Page 7
Technical Specifications
Power Requirement:
Voltage
Current
Connectivity
- LAN Interface
- Common Protocols
- Priority Protocols
Broadcast mode
Audio
- Analogue In / out (peak-to-peak)
- Input Load resistance
- Input Load Capacitance
- Total Harmonic Distortion (THD)
- S/N Ratio (full scale signal)
- Digital Format
User Interface
Firmware Upgrade
Operating Condition:
Temperature
Humidity
Case:
Dimension (WxHxD)
Weight
12 ~ 24V DC (Normal DC 24V)
<100 mA
RJ-45, 100Mb/s
TCP/IP, UDP, IGMP, HTTP
UDMP, ADP
Unicast / Multicast
1.25Vrms
30 Ohm
100 pF
0.1%
83 dB
IMA ADPCM / MP3 (CBR / 320 kbps max) / WAV
(Web Browser) IE V8+, Firefox V22+, Google Chrome V25+, RS485
Via Web Browser
-20°C ~ 80°C
0 - 70%
100 x 147 x 40 mm
300 g
PC Interface Via PMX
The PC Interface via PMX for iPX5300 shall be used to broadcast centralized BGM to remote buildings. The play mode can be
One to One, One to Multiple Sites or One to All. This shall enable the user to control the Source of BGM to be played at remote
buildings from the main rack.
iPX5300 Music Clients that are
connected to PMX will be listed in
PMX user interface.
To allow PMX communicate with iPX5300
make sure under PMX > iPX Configuration, the
‘ Data Port ’ setting is the same as iPX5300 >
NETWORK CONFIGURATION > Application
Settings ‘ Data Port ’ setting.
iPX5300 192.168.0.100 connected
Network Settings
IP Address
Subnet Mask
Gateway Address
Application Settings
