background image

                       WORK AREA SAFETY

•    Make sure you have adequate space to use this charger. 
     Position the charger as far away from the battery as permitted by 
     DC Cable.
•    Never place the charger directly above the battery that is being 
     charged; as this may cause the charger to be damaged by gases 
     expelled from the battery.
•    Never set a battery or any other object on the charger.
•    Use only in a well-ventilated area.
•    Never allow battery acid to drip on the charger when reading 
     electrolyte specific gravity or filling battery.
•    Do not operate charger in a closed-in area or restrict ventilation 
     in any way.

•    Do not charge a frozen battery.
•    Use of an attachment not recommended or sold by the battery 
     charger manufacturer may result in a risk of fire, electric shock, 
     or injury to persons.
•    Do not operate charger if it has received a sharp blow, been 
     dropped, or otherwise damaged in any way; take it to a qualified 
     serviceman.
•    To reduce risk of electric shock, unplug charger from outlet 
     before attempting any repairs or cleaning. Turning off controls 
     will not reduce this risk.

4

Summary of Contents for CGUFB2008


















Reviews: