Ampcontrol Pty Ltd
– ABN 28 000 915 542
IPM V2 USER MANUAL
IPM2B003 Revision 15
– MAY/18
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 60 of 83
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
13.2 Changing Settings
The procedure for adjusting the settings is independent of where the values are stored. The EC Pilot
Mode should be checked prior to making any other adjustments to be certain the changes are made to
the desired memory.
Ensure the outlet is stopped.
For Group 2 Settings in RTM Mode, ensure RTM is online.
Display the parameter that has to be changed.
Close and hold the lock input.
Press the enter button to change the current parameter.
Use the left and right arrows to step through the allowable values until the desired new setting is
displayed.
Press the enter button to indicate that the value is the required setting.
Once Saving indicator has finished on the display, open the lock input.
If the ESC key is operated at any stage during the procedure, the modifying sequence is aborted and the
setting reverts to its previously stored value.
When changes have been made to the stored values, the old value and the new value are stored in the
event log.
A separate log immediately proceeds this, recording the time and date that the change was made.
