IMAC2B009 V2
Uncontrolled Copy - Refer to Ampcontrol Website for Latest Version
Page 12 of 53
Ampcontrol Pty Ltd
– ABN 28 000 915 542
iMAC System User Manual
iMAC2B009 V4
– 10/18
A
P
P
R
OV
E
D
FOR
E
X
T
E
R
N
A
L
D
IS
TR
IB
U
T
ION
–
P
R
OP
E
R
T
Y
OF
A
M
P
C
ON
TR
OL
P
T
Y
LTD
–
N
O
T
T
O
B
E
R
E
P
R
OD
U
C
E
D
I
N
P
A
R
T
SAFETY AND OTHER WARNINGS
For safety reasons, the iMAC System must be installed, operated and serviced only by competent electrical
personnel. Please read and understand this instruction manual completely before installing, operating or
servicing this equipment. Failure to install or operate this system in accordance with the instructions
contained in this manual may create hazardous operating conditions.
Safe Use of Equipment
The equipment supplied has been designed and manufactured to ensure safe operation. The equipment
must only be used within the design parameters.
The instructions within this manual must be observed as an aid towards achieving the safest possible
installation.
Persons responsible for installation, maintenance, or operation, must observe the following
instructions:
2.1.1 Changes to Equipment
Changes in the design and modifications to the equipment are not permitted. Unauthorised changes made
to the hardware or operating firmware will void the manufacturer's warranty, and may compromise the
integrity of the system into which it is installed and other connected equipment.
2.1.2 Equipment Knowledge
Experience with, or understanding of, this equipment is essential for the safe installation and removal of
the equipment. Therefore, please read and understand this manual prior to use. Competency based
training courses are recommended and are available on request.
2.1.3 Manual Handling
Precautions have been taken to ensure all equipment is safe to handle and free from sharp edges.
However, care should always be taken when handling enclosures.
2.1.4 Installation
Correct operation and safety depend on the iMAC System and associated equipment being installed
correctly. Mechanical and or electrical installation and maintenance of plant and equipment must only be
carried out by appropriately qualified personnel and must be tested thoroughly prior to operation.
WARNING!
When installing intrinsically safe equipment, the Conditions of
Certification must be adhered to. Failure to comply with the Conditions
of Certification may seriously compromise the integrity of the system
and/or its components. The user must ensure that
the “Conditions of
Safe Use” outlined in the certificate are met or the certificate (and the
I.S. rating) will not be valid.
2.1.5 Operation
As safety depends on the iMAC System functioning correctly it is highly recommended that all safety
functions of the system be periodically tested to ensure correct operation.
