background image

VT30/OM Rev-A 

 

12

WARRANTY STATEMENT

 

 

Advanced Microwave Products (AMP) warrants these products to be free from defects in 
material and workmanship for a period of one year from date of original shipment.  AMP 
shall, at its option, either repair or replace products which prove to be defective. 

 

No products may be returned to AMP without the permission of AMP.  BUYER, after 
obtaining a return authorization from AMP, shall return the equipment to AMP 
accompanied by a report stating as completely as possible the reason for return, the 
defects, and the conditions under which they occurred.  BUYER shall pay all shipping 
charges, duties, and fees for the return of products to AMP.  All warranty services will be 
carried out at AMP’s facility.  AMP will pay for the return of products to the BUYER. 

 

All articles are to be properly and carefully inspected by BUYER upon receipt.  Shipping 
container damage may indicate equipment damage.  All shipping damage must be 
promptly reported to the carrier.  AMP is not liable for shipping damage. 

 

Limitation of Warranty:  The above warranty does not apply to defects of, or resulting 
from the following: 

 

1) 

End items included as part of a system, but not designed by, AMP are subject 
only to warranty as may be obtained from the original manufacturers.  Such items 
include, but are not limited to, batteries, cameras, monitors, cabling, etc., 

 

2) 

Operation outside of the environmental specifications of the product, 

 

3) Unauthorized 

modifications, misuse, or mishandling, 

 

4) 

Improper or inadequate maintenance by BUYER, 

 
5) 

Improper or inadequate heat sinking by BUYER 

 

6) 

Improper installation or improper testing, 

 

7) 

Malfunction of connected hardware. 

 

THIS WARRANTY IS EXCLUSIVE AND NO OTHER WARRANTY, WHETHER 
WRITTEN OR ORAL, IS EXPRESSED OR IMPLIED.  AMP SPECIFICALLY 
DISCLAIMS THE IMPLIED WARRANTIES OR MERCHANTABILITY AND 
FITNESS FOR A PARTICULAR PURPOSE. 

 

The remedies set forth above are the purchaser’s sole and exclusive remedies.  In no 
circumstances shall AMP assume liability for loss, damage, or consequential expense 
(including loss of profits) whether based on contract, tort, or any other legal theory, 
arising directly or indirectly from the use of its equipment separately or in combination 
with other equipment. 

Summary of Contents for VT30 series
















Reviews: