AMP
®
Deck Lights (Integrated)
ADL Series
INSTALLATION & MAINTENANCE GUIDE
–4–
w w w. a m p l i g h t i n g . c o m
–4–
Remove Cover
Install Cover
1
3
Rotate the cover clockwise until it
stops, then lift the cover straight off.
Note: The first time may be difficult
because the luminaire has a very
tight o-ring seal and a grease sealant
for moisture protection.
Align the notches on the cover to the
base. Firmly rotate the cover until it
locks.
Luminaire
Cover
Cover
Base
Base
Install Base
2
Attach the base on the wall making
sure the arrow is pointing in the
correct direction and secure with the
lock screws.
Note: Wall anchors are required for
certain installation conditions (e.g.
Brick wall, Concrete Wall, etc). Mark
holes on the wall from the base for
the wall anchors. Remove the base
and drill proper holes on the wall,
then insert the wall anchors.
Base
Lock
Screw
Wall Anchor
