[email protected] • 813.978.3900
Product Dimensions
Pro Technique for Hiding Lead Wire
Pro Technique for Hiding Splice Connections
–3–
Package Contents
A. (1) Luminaire
3”
Determine the location for the fixture. Drill a hole straight through the
desired mounting location and run the lead wire out the backside of
the location so that the wires are not visible from the front side. Use a
matching trim piece and cut a groove in the back of trim. Cover the lead
wires with the matching trim piece.
All fixtures come with 25’ of lead wire enabling you to hide the splice
connections out of sight. If you must make a splice connection in view, use
an inline heat shrink style connection that is less visible than traditional
twist caps.
1”
3”
3”
1.5”
3”
3.5”
3”
1.5”
