Amos RF1B1AMUS, User Manual, Page: 8 / 12

- 8 -
Fixed RFID Reader RF1B1AMUS User Manual V
1.00
3 Installation
(1) Connect the signal cable to the Control Box accordingly: red wire to +12V wire,
black wire to the ground, orange wire to weigand0 wire, yellow wire to
weigand1 wire.(Figure 2-2)
(2) Fasten the Wall Mount onto the wall. (Figure 2-1)
(3) Plug the housing of the signal cable (Figure 2-2) to the header (Figure 2-1)
inside the Reader as Figure3-1.
(4) Locate the Reader to the Wall Mount and tighten two M4*20 mm screws to
screw holes (Figure 2-1) of Wall Mount from the bottom side.
(5) Installation completed.
Figure 3-1: Installation Example
※
This device is set with stable power supply of DC +12V.
Please ensure the power type before connecting.
CAUTION