AML ez2254, Assembly Manual

Page: 2 / 76

Warning!
This kit has the potential to be connected to, or generate, high voltages and currents, and high localized temperatures that could cause injury or death to the assembler, operator or end user.
This kit is solely intended as study material for aesthetic and educational purposes. However, should the assembled kit be accidentally or deliberately connected to a source of mains electrical power, potentially lethal voltages and currents could exist within the assembled unit.
This kit must only be assembled by a suitably experienced and qualified electrical or electronic engineer under proper supervision and with suitable safety precautions in place. Ensuring the experience and qualifications criteria are fully understood and complied with is the whole responsibility of the assembler.
Ensuring that this unit is not operated in a way which could cause injury or death is wholly the responsibility of the assembler, operator or end user.
In assembling this kit, you are accepting that all the above warnings and necessary qualifications are understood and complied with and the assembly is at your own risk.
Should this unit be accidentally or deliberately connected to a source of mains power, the following precautions should be observed.
High voltages and currents and localized temperatures will be present on many of the components which could cause injury or death. Voltages in excess of 390v dc and 270v ac may exist even after the source of mains power has been removed. These potentially lethal voltages may be present on many of the components for several
minutes after the power source has been removed. Voltages at the appropriate test points should be carefully measured with suitable test equipment to ascertain the safe or unsafe status of the unit. If the unit has been assembled incorrectly, the capacitors may also represent an explosion risk.
General assembly tips.
1] Take your time. (It is a lot quicker to get it right first time than get it wrong and have to perform corrective measures).
2] Use a suitably powerful soldering iron to ensure that the solder flows properly. This is particularly important for the contacts which are attached to the ground plane and the heatsink securing pins.
3] Ensure that the capacitors are fitted the correct way round as reversing their polarity could be potentially hazardous.
4] Don’t overtighten the chassis screws else you will never get them out again.
If in doubt ask !
End User License Agreement – EULA
End User EDUCATIONAL KIT License Agreement for Audio Maintenance Limited
NOTICE TO ALL USERS: PLEASE CAREFULLY READ THE FOLLOWING LEGAL AGREEMENT (“AGREEMENT”) FOR THE LICENSE EDUCATIONAL KIT BY AUDIO MAINTENANCE LIMITED. BY CLICKING THE
ENTER BUTTON OR PURCHASING THE EDUCATIONAL KIT, YOU (EITHER AN INDIVIDUAL OR A SINGLE ENTITY) CONSENT TO BE BOUND BY AND BECOME A PARTY TO THIS AGREEMENT. IF YOU DO NOT AGREE TO ALL OF THE
TERMS OF THIS AGREEMENT DO NOT PURCHASE THE EDUCATIONAL KIT.
1. License Grant. Subject to the payment of the applicable license fees, and subject to the terms and conditions of this Agreement, Audio Maintenance Limited hereby grants to you a non-exclusive, non-transferable right to use one copy of the specified version of the Educational Kit and the accompanying BUILD MANUAL (“colourbook”).
Audio Maintenance Limited designs and creates printed circuit boards and supplies electronic and electrical components as “kits” which are primarily intended for educational purposes (or “Objet d’art”) but can function as electronics or electrical equipment. As such, Audio Maintenance Limited is held harmless from any harm or damage
which might occur to individuals in the use or function of any Audio Maintenance Limited product. The assembled kit is for display purposes only and is not to be connected to a source of mains electrical power.
2. Term. This Agreement is effective for an unlimited duration unless and until earlier terminated as set forth herein. This Agreement will terminate automatically if you fail to comply with any of the limitations or other requirements described
herein. Upon any termination or expiration of this Agreement, you must destroy all copies of the Educational Kit and the Documentation. You may terminate this Agreement at any point by destroying all copies of the Educational Kit and the
Documentation.
3. Ownership Rights. The Educational Kit is protected by United Kingdom copyright laws and international treaty provisions. Audio Maintenance Limited and its suppliers own and retain all right, title and interest in and to the Educational Kit, including all copyrights, patents, trade secret rights, trademarks and other intellectual property
rights therein. Your possession, installation, or use of the Educational Kit does not transfer to you any title to the intellectual property in the Educational Kit, and you will not acquire any rights to the Educational Kit except as expressly set forth in this Agreement.
4. Restrictions. You may not rent, lease, loan, sublicense or resell the Educational Kit. You may not permit third parties to benefit from the use or functionality of the Educational Kit via a timesharing, service bureau or other arrangement. You may not
transfer any of the rights granted to you under this Agreement. You may not reverse engineer, de-compile, or disassemble the Educational Kit, except to the extent the foregoing restriction is expressly prohibited by applicable law. You may not
modify, or create derivative works based upon, the Educational Kit in whole or in part. You may not copy the Educational Kit or Documentation. You may not remove any proprietary notices or labels on the Educational Kit. All copies must contain the same proprietary notices that appear on and in the Educational Kit. All rights not
expressly set forth hereunder are reserved by Audio Maintenance Limited.
5. Warranty and Disclaimer.
a. Limited Warranty. Audio Maintenance Limited warrants that for 1 year from the date of original purchase of the Educational Kit, its component contents will be free from defects in materials and workmanship.
b. Remedies. Audio Maintenance Limited and its suppliers entire liability and your exclusive remedy for any breach of the foregoing warranty shall be, at Audio Maintenance Limited option, either (i) return of the purchase price paid for the license, if any, or (ii) replacement of the defective parts contained within the Educational Kit. You
must return the parts contained within the Educational Kit to Audio Maintenance Limited at your expense with a copy of your receipt. This limited warranty is void if the defect has resulted from accident, abuse, or misapplication. Any replacement parts will be warranted for the remainder of the original warranty period. Outside the United
Kingdom, this remedy is not available to the extent Audio Maintenance Limited is subject to restrictions under United Kingdom export control laws and regulations.
c. Warranty Disclaimer. Except for the limited warranty set forth herein, THE EDUCATIONAL KIT IS PROVIDED “AS IS.” TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, AUDIO MAINTENANCE LIMITED DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE AND NONINFRINGEMENT WITH RESPECT TO THE EDUCATIONAL KIT AND THE ACCOMPANYING DOCUMENTATION. YOU ASSUME RESPONSIBILITY FOR SELECTING THE EDUCATIONAL KIT TO ACHIEVE YOUR INTENDED
RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED FROM THE EDUCATIONAL KIT. WITHOUT LIMITING THE FOREGOING PROVISIONS, AUDIO MAINTENANCE LIMITED MAKES NO WARRANTY THAT THE EDUCATIONAL KIT WILL BE ERROR-FREE OR FREE FROM INTERRUPTIONS OR
OTHER FAILURES OR THAT THE EDUCATIONAL KIT WILL MEET YOUR REQUIREMENTS. The foregoing provisions shall be enforceable to the maximum extent permitted by applicable law.
6. Limitation of Liability. UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY, WHETHER IN TORT, CONTRACT, OR OTHERWISE, SHALL AUDIO MAINTENANCE LIMITED OR ITS SUPPLIERS BE LIABLE TO YOU OR TO ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, IN-CIDENTAL, OR CONSEQUENTIAL
DAMAGES OF ANY CHARACTER INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL, COMPUTER FAILURE OR MALFUNCTION, OR FOR ANY AND ALL OTHER DAMAGES OR LOSSES. IN NO EVENT WILL AUDIO MAINTENANCE LIMITED BE LIABLE FOR ANY DAMAGES IN EXCESS OF THE LIST
PRICE AUDIO MAINTENANCE LIMITED CHARGES FOR A LICENSE TO THE EDUCATIONAL KIT, EVEN IF AUDIO MAINTENANCE LIMITED SHALL HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. FURTHERMORE. The foregoing provisions shall be enforceable to the maximum extent permitted by applicable
law.
7. Miscellaneous. This Agreement is governed by the laws of the United Kingdom, without reference to conflict of laws principles, and the parties agree that the sole location and venue for any litigation which may arise
hereunder shall be England . The application of the United Nations Convention of Contracts for the International Sale of Goods is expressly excluded. This Agreement sets forth all rights for the user of the Educational Kit and is the
entire agreement between the parties. This Agreement supersedes any other communications with respect to the Educational Kit and Documentation. This Agreement may not be modified except by a written addendum issued by a duly
authorized representative of Audio Maintenance Limited. No provision hereof shall be deemed waived unless such waiver shall be in writing and signed by Audio Maintenance Limited or a duly authorized representative of Audio Maintenance Limited. If any provision of this Agreement is held invalid, the remainder of this Agreement shall
continue in full force and effect. The parties confirm that it is their wish that this Agreement has been written in the English language only.
8. The Educational Kit and MANUAL are provided with Restricted Rights. Use, duplication, or disclosure by the United Kingdom Government may be subject to restrictions. Manufacturer is Audio Maintenance Limited, Manchester, UK.
9. You agree that you will not export or re-export the Educational Kit or Documentation to any country, person, entity or end user subject to United Kingdom export restrictions. Restricted countries currently include, but are not necessarily limited to Cuba,
Iran, Iraq, Libya, North Korea, Sudan, and Syria.
10. The contents of the educational kit are subject to change without prior notice and sales are subject to Audio Maintenance Limited’s standard terms and conditions of business (available on request). Assembly of this kit must only be performed by a suitably qualified engineer who holds a current Audio Maintenance Limited High Voltage
Kit Build certificate.
You warrant and represent that neither the United Kingdom Government nor any other United Kingdom Government agency has suspended, revoked or denied your export privileges.
Attention/Disclaimer
Although this kit can be assembled and built into a functioning audio equalizer, due to the high voltages and possibilities of human builder error, Audio Maintenance Limited hereby assumes no liability for injury/damage/ loss which might unintentionally occur.
This manual is for informational purposes only.
Copyright © 2013 Audio Maintenance Limited. All Rights Reserved.