Multi-Service Gateway with WLAN Controller
schedule at
System
->
Scheduling
menu.
10. MTU
: MTU refers to Maximum Transmit Unit. Different WAN types of connection
will have different value. You can leave it with 0 (Auto) if you are not sure about
this setting.
11. Keep Alive:
You can do preferred settings by using this feature to prevent the
built-in 3G modem from some sort of auto-timeout and disconnects from the
internet after a period of inactivity.
12. NAT :
If you disable this option, it will act with a non-NAT function.
13. IGMP:
Enable or disable multicast traffics from the internet. You may enable as
auto mode or select by Auto ,IGMP v1, IGMP v2, IGMP v3.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
3.1.1.3 Load Balance
This device support multi-WAN load balance function and more than one WAN
interfaces can access to Internet at a time. The load balance function can help you to
manage the outbound traffics and to maximize the utilization of available bandwidth.
1. Load Balance:
Enable or disable the load balance function.
2. Load Balance Strategy:
Once you enabled the load balance function, you have
to further configure which strategy is to be applied for load balancing the outbound
traffics. There are three load balance strategy: “
By Smart Weight
”, “
By Priority
”,
and “
By User Policy
”.
By Smart Weight:
SDE852 User Manual
38