
Multi-Service Gateway with WLAN Controller
10. NAT :
If you disable this option, it will act with a non-NAT function.
11. IGMP:
Enable or disable multicast traffics from the internet. You may enable as
auto mode or select by Auto ,IGMP v1, IGMP v2, IGMP v3.
12. WAN IP alias
: The device supports 2 WAN IP addresses for a physical interface,
one is for primary connection that provides users/devices in the LAN to access
Internet; the other is a virtual connection that let remote user to manage this
device.
Afterwards, click on “Save” to store your settings or click “Undo” to give up the
changes.
L2TP
Choose L2TP (Layer 2 Tunneling Protocol) if your ISP used a L2TP connection. Your
ISP will provide you with a username and password. This option is typically used for
DSL services.
1. WAN Type:
Choose “L2TP” from the drop list
2. IP Mode
: Please check the IP mode your ISP assigned, and select “Static IP
Address” or “Dynamic IP Address” accordingly. If you select “Static IP Address”
option, you have to specify additional “WAN IP Address”, “WAN Subnet Mask”,
and “WAN Gateway ” settings provided by your ISP.
SDE852 User Manual
34