7
In-wall installation
Preparing the ALF120
A pack of felt pads are supplied with
the ALF120. These must be fitted to the
ALF120 when wall-mounted to reduce
bass sound coupling into the walls and
floor.
Fix six felt pads to the underside of
•
the cabinet.
Fix fifteen felt pads to each of the
•
front and back surfaces
Fit six felt pads to each of the side
•
surfaces of the cabinet
The drawing below shows the correct
locations for the pads.
Connecting the ALF120
Once the pads are fitted the ALF120 is
ready to be connected.
•
Position the ALF120 close to the wall.
•
Cables will be marked with a coloured
line or have a moulded rib on one
edge.
By convention this wire is the +
(positive) wire. The unmarked wire is
the - (negative) wire.
coloured line
rib
Connect the cable(s) to the terminal
•
panel, observing polarity.
