11
Free-standing
Vertically
In some rooms it may be possible to
stand the ALF120 vertically behind
furniture. If you are considering this
arrangement, always check the following
points -
Fit felt pads the end of the cabinet
•
that stands on the floor.
The outlet port must vent into free
•
air and not be obstructed by a wall or
furniture.
Ensure that the ALF120 is secured to
•
a fixed surface, such as bracketed to
a wall, to ensure there is no danger
of it toppling and causing damage or
injury.
Ensure that the cable(s) to the
•
amplifier are fixed to stable surfaces
and will not be a trip hazard.
Horizontally
The ALF120 is also suitable for horizontal
use, laid on its back underneath furniture.
If you are considering this arrangement,
always check the following points -
Fit the feet to the back of the cabinet
•
that stands on the floor.
In horizontal installation the acoustic
•
port must be set at the end of the
cabinet and must not be obstructed.
Check that a clearance greater
•
than 125mm from the floor exists to
accommodate the ALF120.
125mm
Ensure that the cable(s) to the
•
amplifier are fixed to stable surfaces
and will not be a trip hazard.
