HD SkyLink
Manual AMIMON HD SkyLink
page
|
27
www.globe-flight.de
Other malfunctions
The receiver keeps displaying the “Searching…” message, and the network LED is blinking:
It should not take longer than one minute to establish a wireless link. If the link was not established after
one minute, check if the transmitter is powered on and that it is not connected to another receiver.
The receiver shows the message “Connected to source name, Please Check Video Source”:
Check the HD-SDI connection between the transmitter and the video source.
The receiver displayed a connection failure message and now a “Wireless Off” message appears:
If there is more than one registered transmitter and the receiver failed to connect to it within a minute or
two, the receiver will go into standby mode and shut down the RF module. In order to connect to the
desired source, press the “SOURCE” button and choose the desired transmitter.
The network LED flashes rapidly and no video is displayed on the monitor:
Power cycle the unit. If the issue remains, the device might be faulty. Please contact Amimon
support team.
The wireless link cannot be established or the video/audio quality is low:
Try to decrease the range between the transmitter and the receiver or remove obstacles from the line of
sight between the transmitter and receiver.
