Other malfunctions
The receiver keeps outputting a “Searching…” message, and the NETWORK LED is
constantly blinks:
It should take up to one minute to establish a wireless link. If the link was not
established within that time period, verify the transmitter is powered on and not connected to another
receiver.
The receiver is outputting “Connected to source name, Please
Check Video Source”
:
Check
the HD-SDI connection between the transmitter and the video source.
The receiver displayed a connection failure message and o
utputs a “Wireless Off” message
:
If there is more than one registered transmitter, and the receiver failed to connect to it within a minute
or two, the receiver will go into standby mode and shut down the RF. In order to connect to the
desired source, press on the “SOURCE” button and choose the desired source.
The NETWORK LED blinks rapidly and there is no display on the monitor:
Power cycle the
unit. If the issue remains, the device might be faulty. Please contact Amimon support team.
Link cannot be established or poor video/Audio quality:
Try to decrease the range between the
transmitter and the receiver or remove obstacles out of the way between the transmitter and receiver.
