background image

 

Important Notice 

AMIMON Ltd. reserves the right to make corrections, modifications, enhancements, improvements, and 
other  changes  to  its  products  and  services  at  any  time  and  to  discontinue  any  product  or  service 
without  notice.  Customers  should  obtain  the  latest  relevant  information  before  placing  orders  and 
should verify that such information is current and complete. All products are sold subject to AMIMON's 
terms and conditions of sale supplied at the time of order acknowledgment. 

AMIMON warrants performance of its hardware products to the specifications applicable at the time of 
sale in accordance with AMIMON's standard warranty. Testing and other quality control techniques are 
used  to  the  extent  AMIMON  deems  necessary  to  support  this  warranty.  Except  where  mandated  by 
government requirements, testing of all parameters of each product is not necessarily performed. 

AMIMON  assumes  no  liability  for  applications  assistance  or  customer  product  design.  Customers  are 
responsible  for  their  products  and  applications  using  AMIMON  components.  To  minimize  the  risks 
associated  with  customer  products  and  applications,  customers  should  provide  adequate  design  and 
operating safeguards. 

AMIMON  does  not  warrant  or  represent  that  any  license,  either  express  or  implied,  is  granted  under 
any  AMIMON  patent  right,  copyright,  mask  work  right,  or  other  AMIMON  intellectual  property  right 
relating  to  any  combination,  machine,  or  process  in  which  AMIMON  products  or  services  are  used. 
Information  published  by  AMIMON  regarding  third-party  products  or  services  does  not  constitute  a 
license from AMIMON to use such products or services or a warranty or endorsement thereof. Use of 
such  information  may  require  a  license  from  a  third  party  under  the  patents  or  other  intellectual 
property of the third party, or a license from AMIMON under the patents or other intellectual property 
of AMIMON. 

Reproduction of information in AMIMON data books or data sheets is permissible only if reproduction is 
without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. 
Reproduction of this information with alteration is an unfair and deceptive business practice. AMIMON 
is not responsible or liable for such altered documentation. 

Resale  of  AMIMON  products  or  services  with  statements  different  from  or  beyond  the  parameters 
stated  by  AMIMON  for  that  product  or  service  voids  all  express  and  any  implied  warranties  for  the 
associated AMIMON product or service and is an unfair and deceptive business practice. AMIMON is not 
responsible or liable for any such statements. 

All company and brand products and service names are trademarks or registered trademarks of their 
respective holders. 

 
Avis Important 

AMIMON Ltd. se réserve le droit d'apporter des corrections, modifications, améliorations et autres 
changements à ses produits et services à tout moment, et de mettre fin à tout produit ou service sans 
préavis. Les clients doivent obtenir les dernières informations pertinentes avant de passer commande et 
doivent vérifier que ces informations sont à jour et complètes. Tous les produits sont vendus selon les 
termes et conditions de vente d'AMIMON fournis au moment de la confirmation de commande. 

AMIMON garantit la conformité de ses produits manufacturés avec les spécifications en vigueur au 
moment de la vente, conformément à la garantie standard AMIMON. Des tests et autres techniques de 
contrôle de qualité sont effectués dans la mesure où AMIMON le juge nécessaire pour assurer cette 
garantie. 

Les tests de tous les paramètres de chaque produit ne sont pas nécessairement effectués, sauf s'il 
s'agit de se conformer aux exigences du gouvernement. 

Summary of Contents for AMN0504PBLR



































Reviews: